Yong Soeb Chung
Experience
Design/Test Team Leader April 2013 to Present
Briggs & Stratton Corp, Mcdonough, Georgia
Briggs & Stratton in Mcdonough is a manufacturer of Walk Lawn Mower, Tractor, Pressure Washer,
Snow Thrower
* Technical Team Leader for Design Verification of Lawn Mowers
* Review and Analysis of Design Drawings(ASME Y14.5M-GD&T) for Lawn Mower
* Problem/Root Cause Analysis, Corrective/Preventive Action, FMEA (Failure Mode and Effect Analysis)
* Lean Manufacturing, 6 Sigma, Design for 6 Sigma, PPAP/MPAP
* Upgrade Current Product Design, Fixture Design, Pro-E WildFire 5.0, SAP
Quality/Configuration Team Leader Nov 2011 to April 2013
DSE Systems, LLC, Gaffney, South Carolina
DSE is a manufacturer of manufacturer of precision metal components, assemblies and ordnance products, including millions 40mm grenades for the US military.
* Technical Team Leader for Quality Assurance/Design, Supervising SPC Coordinator
* SPC (Statistical Process Control)-Cpk, Quality Management Systems (ISO 9001:2008), NCR, MRB, BOM
* Problem/Root Cause Analysis, Corrective/Preventive Action, FMEA (Failure Mode and Effect Analysis)
* Quality Management System Control, SPC Improvement, Lean Manufacturing, 6 Sigma
* Technical Configuration Management (Contract/Document Review, Prepare Contract Requirements)
* AIE (Acceptance Inspection Equipment), FAT (First Article Test), QM (Quality Manual), IR (Inspection Record), FAIR (Final Attribute Inspection Record), Inspection Procedure, Work Instruction, SPC General Pan, SPC Detail Plan, Critical Defect Report, ECP/NOR/RFD/RFW, CCCP/CPOA,SOW, RFQ Requirement
* Vendor/Supplier Quality Audit
* Part Tolerance: Within .01", Gage Tolerance: Within .0005", Quantity: High Volume(Millions)
* Review & Analysis for Drawings(Blueprint) and Specification and ASME Y14.5M-GD & T
* Gage/Fixture Design Review and Guidance: Autocad, Solid Edge
* Shipping/Packing/Marking Procedures
Senior Quality Assurance Engineer June 2008 to Oct 2011
Elster Amco Water, LLC, Ocala, Florida
Elster AMCO Water is an industry leader in the development and implementation of innovative water metering and system solutions
* Root Cause Analysis and Test for Customer Complaint
* Preventive Action for Consistent Quality Control
* Gage R&R, Gage Analysis
* Drawing Tolerance Interpretation per ASME Y14.5-GD&T
* SPC Improvement
* Trained Operators/Inspectors for the Test Method/Procedure/Safety
* Gage and Test Fixture Design for the Projects: Autocad, Solid Works
* Developed the Test Method and Test Procedure
* Mechanical and Environmental Tests for Part Reliability (MIL-STD-810F)
* Part Design for Plastic Injected/Molded Parts
Senior Design/Configuration Engineer September 1998 to June 2008
Balimoy Manufacturing Co. (a branch of DSE, Inc.) , Tampa, Florida
Balimoy was a manufacturer of precision components for 40MM grenades used by the US military.
Managed 5 Engineers for the following products and projects, producing millions of individual parts annually:
* M918 TP (Projectile Assembly-Body, Body Assembly, Ogive, Ogive Assembly, Body Insert,
Firing Pin, Firing Pin Plate, Capsule Assembly, 40 MM Practice Grenade
* M385A1 (Body and Body Assembly, 40 MM Practice Grenade),
* M430A1( Body and Body Assembly, Ogive, 40 MM HEDP),
* M550 Fuze (Body Fuze, Actuator, Top Plate, Hammerweight Assembly), BLU-109
(Lug Suspension)
* Adapter Magazine, Slider Block, Cap Retainer, Mounting Leaf
* Sheet Metal Punching
Responsibilities included:
* Quality Management Systems: ISO 9001:2001
* Gage, Fixture, Tool and Extrusion Design with 2D & 3D Modeling (AutoCAD, Mechanical Desktop) for Automotive Part(Parker Mini Block), 40 mm Grenades and Other Military Parts
* All Technical Documentation/Quality Control: AIE/AAIE, FAT, SPC General/Detail Plan, Critical Defect Report, ACNCP, ECP/NOR/RFD/RFW
* Lean manufacturing, 6 Sigma, SPC(Cpk),
* Trained Operators for the Test Method/Procedures/Safety (ASME, ISO, ANSI)
* Gage R&R, Gage Analysis, Drawing(Blueprint) Interpretation per ASME Y14.5-GD&T
* Configuration Management - Contract Technical Review/Analysis (Drawing and Specifications, etc.)
* Critical Defect Plan, Ammunition Data Card, etc.), BOM, Configuration Management Plan
* Program/Train for Vision System and CMM
* 2D Bar Coding Set-Up (MIL-STD-129), Pallet Design (Heat Treated), Shipping/Packing/Marking Layout
* Cage Design for Parts
Also Acting Engineering Manager (2004 to April, 2006)
Professor March 1992 to Aug 1998
Kum Oh National University, South Korea
Taught the following courses: 'Mechanisms', 'Kinematics', 'Machine Element Design',
'Mechanical Drawing (AutoCAD)’, Advanced Engineering Mathematics',
‘Linear Algebra’, ‘Differential Equation’, 'CAD & Computer Graphics',‘CAD/CAM (Optimization)’
Performed research for various government projects.
* A Study of Resonance Analysis for a Timing Belt in a Gasoline Engine
* The Development of a Ventilation System for a Poultry Farm.
* The Development of an Automatic Control System for a Poultry Farm
* The Labeling Automation for an Onion Case
* The Factory Automation for Labeling of Onion N...
Login or Register to view the full resume.
